How To Better Use The Truss Manipulator

The truss manipulator is a high-speed manipulator that provides powerful support for the large-scale or multi-variety small-batch production of processing equipment such as lathes, grinders, and special processing machines. The correct use of the truss manipulator can reduce the company’s dependence on labor, reduce production costs, and achieve Sustainable development of the enterprise. So how can it be better used in daily applications?

1. The more basic is the correct installation of the CNC machine manipulator. People should also pay more attention to the installation of the truss manipulator. It is necessary to ensure that the installation of all components is in place. Incorrect installation not only affects the appearance, but also causes malfunctions during use, and the service life will be greatly reduced.　　

2. We must see with our eyes and listen with our ears. Checking and listening for signs of wear or adjustments can greatly help keep the manipulator in optimal operating condition.　　

3. After the lathe manipulator has been running for a period of time, it is necessary to stop the operation of the truss manipulator to release the heat generated by the truss manipulator to achieve the goal of maintaining the life of the manipulator.　

4. If you are in such a damp environment for a long time, the lathe manipulator made of iron is very easy to give birth to a rusty environment. The rusty truss manipulator not only has a big impact on the appearance, but also pollutes the products operated by the manipulator, and affects the operating quality of the lathe manipulator. Therefore, use the lathe manipulator in a relatively dry environment and dry the lathe manipulator regularly.　　

5. Clean up regularly to keep the guide rails and bearings at all shafts clean and good lubrication performance.　　

6. In the case of high-speed operation, the vibration frequency may be very high. It is best to install the manipulator on a support structure independent of the molding equipment.　　

7. Ensure the safety of wiring ties and reasonable installation of cables.　　

8. Always refer to the manipulator manual for reasonable lubrication of metal parts.