What Should Be Paid Attention To When Welding Robots Are Being Repaired?

Considering the complexity of the welding robot system, it is still necessary to pay attention to some details during maintenance, otherwise the original fault may not be repaired, and new problems may appear. The precautions for welding robot maintenance are as follows:

Before operating the welding robot, pay attention to check whether there is water or oil in the electrical control box. If the electrical appliance is damp, do not turn it on, and check whether the power supply voltage is in compliance and whether the front and rear safety door switches are normal. Verify that the direction of rotation of the motors is consistent. Then turn on the power.

The use of welding robots can reduce the scrap rate and product cost, improve the utilization rate of machine tools, and reduce the risk of defective parts caused by workers' misuse. Machine tool loss, speed up technological innovation, improve corporate competitiveness, etc. Robots have the ability to perform various tasks, especially high-risk tasks, and the average failure time is more than 60,000 hours, which is longer than traditional automation processes. Welding robots can replace more and more expensive labor, and at the same time can improve work efficiency and product quality. 

Foxconn robots can undertake the task of assembling fine parts of the production line, and can replace manual work in unfavorable working environments such as spraying, welding, and assembly. Some unskilled workers. 

The functions of welding robots are constantly improving (high speed, high precision, high reliability, and easy to operate and repair), and the manipulator controller system is also developing towards an open controller based on a PC, which is convenient for standardization, networking, and device integration. , the control cabinet is becoming more and more compact, and adopts a modular structure: the reliability, ease of operation and repairability of the system are greatly improved, and the role of virtual reality skills in robots has been developed from simulation and rehearsal to process control. The remote-controlled robot operator operates the robot with the feeling of being in a remote working environment. the

When the welding robot needs to be dismantled, among them, turn off the power supply of the injection machine; turn off the power supply of the manipulator; turn off the air pressure source of the manipulator. Release the air pressure. Loosen the set screw of the extraction cylinder fixing plate and move the arm close to the arch. Move the bumper mount closer to the arm. Tighten the fixed plate of the extraction cylinder so that the arm cannot move. Lock the rotation safety screw so that the manipulator cannot rotate, etc. These details should be paid attention to.